Setting up a Face Recognition Clock Administrator

 

It is recommended to have at least one FR700/FR650 clcok administrator.  The administrator function allows you to review the device ifnromation, set up network communications, set the time/date, and reset the clock to factory defaults. Warning Anyone can access the administrator functions if there isn't at least one administrator configured.

  1. At the FR700/FR650 clock, press the Menu key. Please NoteClosedIf someone has already been set up as an administrator and you are setting up a new administrator, they should present and position themselves for a facial scan.
  2. The Functions Menu will display.
  3. Press 1, the Set Admin menu will display.
  4. From the Set Admin menu, press an available admin number, 1-5.
  5. Position the new clock administrator so their face is in the middle of the two cameras with 9 to 25 inches between the face and the clock.
  6. The image collecting screen will display, start the face recognition enrollment.
  7. Perform 2 small head circles to the right.
  8. Perform 2 small head circles to the left.
  9. Move the face close to the clock until the white dashed square appears.
  10. Move the face back until there is 9 to 25 inches between their face and the clock.
  11. Turn the head fully to the right.
  12. Turn the head fully to the left.
  13. Raise the head up slightly.
  14. Lower the head down slightly.
  15. If you receive the message about adjusting your position, make sure to move the face back from the clock until there is 9 to 26 inches between the face and the clock.
  16. The progress bar at the bottom of the screen will display the process of imaging.  Repeat any head movements done during enrollment as necessary until the process is complete.
  17. When the face is registered the clock will give you the option to Add as User?. Press ESC for no.

 

Wed 12/05/2018